Automatic job timers
Last updated:
Labs feature
This is a Labs feature. An administrator turns it on for your account first (step 1 below).
This feature requires a subscription to the SortScape Premium plan.
Automatic job timers use GPS on your crew’s phones to start the job timer when they arrive at a property and stop it when they leave, so time on site and timesheets no longer depend on someone remembering to tap. You can choose fully automatic timers, or reminders to start and stop.
iPhone app only for now. Automatic job timers need the SortScape iPhone app. This page describes the latest version, so make sure your crew have updated from the App Store. Automatic job timers for Android are coming soon. The account setting is changed by an administrator in a web browser or in the app.
How it works
Section titled “How it works”Each crew member who turns it on gets a circle of about 200 metres drawn around each of today’s jobs on their run (bigger on a large property your office has set up). Five rules cover everything it does:
- Only your jobs, and only once you’ve been away. Today’s open jobs on your run get a circle. A circle you’re already inside when it’s drawn starts nothing until you’ve left it.
- Arrive and the timer starts, from when you arrived. If you’re inside several jobs’ circles, it starts the next unfinished one on your run, and you can switch with one tap. A job that already has time on it today asks instead of starting again.
- Leave and it stops, from when you left.
- Anything under 3 minutes doesn’t count. Driving past a job, or stepping out and coming back, leaves nothing on the timesheet and no notification. Notifications don’t come straight away, only once SortScape is sure; recorded times stay exact.
- The job you’re on keeps the timer until you leave it. Once it’s past its first 3 minutes another job’s circle can’t take over. Jobs next door (under 200 m) can’t be told apart, so stopping or finishing one by hand offers the next.
Your administrator chooses one of two modes:
- Automatic: the phone starts and stops the timer, and a notification tells you it did.
- Reminders: the phone asks you instead, and you decide. See Reminder mode.
A few more things to know:
- Only the run you’re assigned to that day counts. An administrator driving past another crew’s stop won’t start a timer on it. If nobody is assigned to the run, nothing starts (a one-person account is the exception: every run counts as yours).
- Timers start for that phone’s user only. Start for whole crew is still a manual action.
- Leaving never marks a job complete. Completing a job is still a deliberate tap, because it can send the customer’s completion notification and feed invoicing.
- The Start timer and Stop timer buttons work as before. Leaving stops a timer you started by hand, and you can stop an automatic one by hand.
- The property needs a map location. If an address can’t be placed on the map, an administrator can pin it on the property form.
Setting it up
Section titled “Setting it up”1. Turn it on for your account (administrator)
Section titled “1. Turn it on for your account (administrator)”- Open Settings → System → Labs and turn on Automatic job timers.
- Open Settings → Jobs → Automatic job timers.
- Switch on Turn on automatic timers.
- Choose what happens when a crew member arrives or leaves:
- Start and stop the timer
- Send a reminder
Accounts that are not on Premium see this page with an upgrade prompt instead of the switch.
2. Each crew member turns it on for their phone
Section titled “2. Each crew member turns it on for their phone”The account setting does not switch anything on by itself. Each crew member opts in on their own phone, so people who do not want it are not affected.
-
In the SortScape iPhone app, open Settings → This device → Automatic job timers and turn it on.
-
SortScape shows the questions your iPhone is about to ask and the answer to pick in each. Read them, then tap Continue.
-
Your iPhone asks the three questions one after another. iOS asks each one only once, so pick these answers:
Allow While Using App, and leave Precise on. The circles around each property need your exact position.
Change to Always Allow. The feature only works with the phone in a pocket if location is set to Always.
Allow notifications. The arrival and departure notifications are how the feature talks to you.
If you picked a different answer
iOS will not ask again, so the fix is in the phone’s Settings. SortScape shows a checklist under the switch with what is done and what is left. Tap Open Settings on the item that needs it.
In Settings, tap Location, choose Always and check Precise Location is on. For notifications, tap Notifications and turn on Allow Notifications. Come back to SortScape and the checklist updates by itself, then disappears once everything is done.
The row only appears once an administrator has turned the feature on for the account, and only in the iPhone app.
What the notifications say
Section titled “What the notifications say”Notifications don’t arrive the moment you pull up or drive away. SortScape waits a little first, until it’s confident you’ve really arrived or really left, so a drive-past or a quick step out never sets one off. The times on the timesheet don’t wait: they’re still the moment you arrived and the moment you left.
- Timer started at 12 Smith St. “From 9:02.” Tap it to open the job.
- Timer started at 12 Smith St, when other jobs were inside the circle too: “From 9:02. Wrong job? Tap to switch.”
- Left 12 Smith St. “Timer stopped at 10:14.” If you come straight back, this one never arrives.
While a timer is running it also shows on the iPhone lock screen (and in the Dynamic Island on phones that have one), counting up from when it started. Tap it to open the job.
If it picks the wrong job
Section titled “If it picks the wrong job”If it picks the wrong job, tap the notification to switch. A list opens with the jobs inside the circle, in run order, and the one it started is ticked. Tap the right job and the time moves to it, from when you arrived. Nothing is left on the wrong job.
- None of these at the bottom of the list removes the time entry, for when you weren’t at any of them.
- When other jobs were in the circle, the lock screen timer says Wrong job? Tap for the first 30 minutes. It opens the same list.
- If the timer has been running for more than 30 minutes, the job you pick starts now instead, and the first job stops now. By then you have most likely finished the first job and moved next door.
- Long-press the notification for shortcuts: up to two Switch to buttons and Not this job. These work without signal.
- Tapping an old notification after another job has started just opens the job. It doesn’t change any times.
Not this job is on every “Timer started” notification (long-press it). It removes that time entry, so nothing is left on the timesheet. It works even if the timer has already stopped. Use it for a start that shouldn’t have happened, such as lunch at home beside a customer’s place.
Everyday situations
Section titled “Everyday situations”Driving past a job. Driving past one job on the way to another leaves nothing on the timesheet for the one you passed, and you get no notification about it. You only hear about the job you stop at.
Stepping out. Back within 3 minutes (a trip to the ute, a coffee across the road) and the same timer carries on as if you never left, with no notification. Gone longer, and the timer stops from when you left. When you come back the phone asks Start 12 Smith St? instead of starting it, because the job already has time on it today.
A busy street. When several of today’s jobs are inside the circle, the next unfinished one on your run starts. If you’re working out of order, tap the notification to switch.
Jobs next door. Under 200 metres apart, a phone can’t tell two properties apart. Walking from one to the next doesn’t move the timer, because the job you’re on keeps it until you leave. When you finish the first, tap Stop timer or complete it, and the app offers to start the next one.
A large property. On a big block the crew can walk out of the circle while they work. Under 3 minutes out doesn’t count, so a short wander goes unnoticed. If they’re out longer, the timer stops and they’re asked whether to start it again. Give the property a bigger circle so that stops happening. See Large properties.
Large properties
Section titled “Large properties”A 200 metre circle covers about 12 hectares (31 acres). That’s plenty for a house block, but on a farm, vineyard or estate the crew can work right out of it, and the timer stops while they’re still on the job. An administrator can give the property a bigger circle:
- Open the Property and click Edit.
- Next to the Address field, click the map-marker button (Adjust GPS location).
- Drag the red pin to the middle of the area the crew works. The circle is drawn around the pin, so a pin on the road or at the front gate puts half the circle off the property.
- Under Automatic job timer fence, pick a size. The green circle on the map shows what the phones will use:
- Standard (200 m)
- Large (350 m)
- Very large (500 m)
- Click Confirm, then save the property.
Pick the smallest size that covers where the crew works. A bigger circle also starts the timer further out, so on the way in it starts a little before the crew reaches the work area. A drive past on a road through the circle still leaves nothing, because anything under 3 minutes doesn’t count.
The crew’s phones pick up the new size the next time they refresh the day’s jobs. Automatic job timer fence only shows once automatic job timers are turned on for your account. See Adjust property location on the map (GPS pin) for more on the pin.
Reminder mode
Section titled “Reminder mode”In reminder mode every start and stop becomes a question, sent at the same time the automatic notification would be.
- Arriving: “Start 12 Smith St?” Long-press it for Start. If other jobs are inside the circle too, there is also a Start 14 Smith St instead button for up to two of them.
- Leaving: a notification asks whether to stop the timer.
We recommend starting with reminders until your crew have seen it work for a week or two, then switching to automatic.
What the office sees
Section titled “What the office sees”Time recorded this way appears in the job’s Time spent section like any other timer entry, and in timesheets and reports. Each entry also records what started and stopped it (a button, arriving or leaving a property, a reminder, or completing the job) and the phone’s position at the start and the stop. If a customer ever disputes a job, you have a start and a stop that are both time-stamped and location-stamped.
An entry that a phone started automatically and that lasted under 3 minutes is removed by itself. An entry someone started with a tap, or one with a note, is never removed this way.
Entries can be edited or deleted like other timer entries, subject to the usual rules in Job timer.
Privacy
Section titled “Privacy”Automatic job timers do not track your crew. Nobody’s live location is shown anywhere in SortScape or stored. The only locations saved are the phone’s position at the moment a timer starts and the moment it stops. The phone uses standard iOS region monitoring to notice arrivals and departures, not continuous GPS tracking.
Limitations
Section titled “Limitations”GPS on a phone isn’t perfect. Things to expect:
- Stop times can run a little long. An iPhone only reports leaving once you’re well clear of the property, so a stop time can be a few minutes after you actually left, more on foot than in a car. Entries can be edited in Time spent afterwards.
- A drive-past can occasionally leave a short entry, when the phone is very late noticing you left. Tap Not this job, or delete it in Time spent.
- Lunch beside a job you haven’t done yet can start it, because you stayed more than 3 minutes. Tap Not this job.
- No signal at the property. The circles still work without reception, and the app queues the start or stop. It sends it the next time the app is opened, not automatically when signal returns. A queued start that is more than 15 minutes old is dropped rather than recorded, because it would put a guessed entry on the timesheet. A queued stop that is more than 15 minutes old becomes a Timer still running reminder instead, so you can stop the timer and fix the time by hand.
- A Focus on the phone (such as Driving) holds the notifications until it ends. The timer still starts and stops on time.
- Low Power Mode on the phone can delay location events.
- Up to about 19 jobs at a time get a circle, nearest first, and the phone moves them along as you work through a long run. That’s an iOS limit.
Troubleshooting
Section titled “Troubleshooting”Nothing happens when a crew member arrives
Work through these in order:
- Open Settings → Jobs → Automatic job timers and check the account switch is on and a mode is chosen.
- On their phone, open Settings → This device and check Automatic job timers is on. If the row is missing, update the SortScape app from the App Store and check they are on an iPhone.
- Check there is no checklist under the switch. If there is, follow it: location must be Always with Precise Location on. “While using the app” is not enough.
- Check notifications are allowed for SortScape in the phone’s settings. Without them the notifications can’t appear.
- Remember the notification comes a little after arriving, not straight away. The timer itself starts from the moment they arrived.
- Check whether the crew member was already near the property (within about 200 metres) when the day started, when the job was added to their run or when they turned the switch on. That circle doesn’t start a timer until they have left it once. Start the timer by hand this time.
- Check the job is on today’s job run and that the crew member is assigned to that run. Jobs on other crews’ runs, and runs nobody is assigned to, don’t get a circle.
- Check whether the job already has time on it today. If it does, the phone asks instead of starting.
- Check the property has a map location. Open the property, click Edit and look at the map-marker button next to the address. If the address couldn’t be placed, pin it by hand.
A crew member has their phone’s location turned off
Nothing happens for them. SortScape can’t see where they are, so the timer behaves as if the feature were off on that phone. They can still start and stop timers by hand.
The timer keeps stopping and starting on a big property
Move the property’s pin to the middle of the block and give it a bigger circle. See Large properties.
The reinstalled app doesn’t notice I’m already on site
After reinstalling, turn Automatic job timers off and on again in Settings → This device so the circles are redrawn. Then leave the property once, or start the timer by hand.